Alberto
2014-07-06 18:53:57 UTC
Hello everybody,
Im using an IPEVO P2V camera (1778:0204) on a Raspberry Pi rev.B
The camera is recognized under Raspbian 3.12.24+ #693, but of course Id need to setup focus, that is natively in auto mode, but is not working.
Ive installed libwebcam, to use the uvcdynctrl utility and manually setup the focus, but only thing I get is 5 minutes of warning, and eventually the focus is set up.
Ive modified the libwebcam source to suppress the warning log on screen and on log file, but still the command needs more that 1 minute to be executed.
Do you have any suggestion to bypass the usage of libwebcam (and uvcdynctrl) and setup the focus anyway?
Thanks everybody for your support.
Albatetra
Im using an IPEVO P2V camera (1778:0204) on a Raspberry Pi rev.B
The camera is recognized under Raspbian 3.12.24+ #693, but of course Id need to setup focus, that is natively in auto mode, but is not working.
Ive installed libwebcam, to use the uvcdynctrl utility and manually setup the focus, but only thing I get is 5 minutes of warning, and eventually the focus is set up.
Ive modified the libwebcam source to suppress the warning log on screen and on log file, but still the command needs more that 1 minute to be executed.
Do you have any suggestion to bypass the usage of libwebcam (and uvcdynctrl) and setup the focus anyway?
Thanks everybody for your support.
Albatetra